It’s a versatile and economical heat source for a wide variety of industrial and commercial applications.Standard tube diameters are 6mm, 8mm, 10mm, 12mm, 16mm,18mm,20mm etc ,other special sizes are available for Finned strip...
Read More
24v Cartridge Heater:Hot Selling 12v/24v 20W 30W 40W 50W Heater Cartridge For immersion machine I mmersion Cartridge heaters are designed for heating water and other liquids.24v Cartridge Heater
Read More
Thermocouple Connection Head The isolated HART intelligent temperature transmitter (round card) is used for the signal input of resistance temperature detector (RTD) and thermocouple (TC) and 4 - 20mA analog output of the two-wire...
Read More
Mgo head and bottomElectric ceramic production, magnesium oxide ceramic products, excellent performance, price from the superior!Free samples can be provided to send, to sample drawings can be produced!Welcome new and old customers to...
Read More
Finned Heaters The finned belt heater is filled with highly compressed MgO insulation that transfers heat from the nickel-chromium wire to the outer sheath.The spacing between the fins maximizes surface contact, so that heat is...
Read More
Flange Cartridge Heater Protected with a stainless steel sheath,the plangent cartridge heater’s watt density can reach 25 w/cm² and their operating temperature can go up to 800°C (1472°F)，Flange Cartridge Heater
Read More
K Type Thermocouple Type K is very common in nuclear applications due to its relative radiation hardness.The highest continuous temperature is about 1100℃.Type K thermocouples usually work in most applications because they are...
Read More
The Industrial Tank Heater is made of sanitary seamless stainless steel tube with strong corrosion resistance and suitable for heating low concentration alkaline liquid
Read More
High Temperature Cartridge Heater,Cartridge heaters are an excellent choice to use as a conductive source for heating solid metal plates, blocks and dies or as a convective heat source for use in a variety of liquids and gases.High...
Read More
Immersion water heater is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures Immersion Water Heater
Read More
Spring Coil Heater Made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. Spring coil heater are annealed to acquire malleability for...
Read More
1. Materials :201, 202, 304, 304L, 316, 316L, 409, 430,440a, etc.
2. Standards :ASTM, JIS, DIN, EN, GB
3. Thickness :0.5-100mm or customer's requirement
4. Outside diameter :0.6m or customer's requirement