Flange Cartridge Heater Protected with a stainless steel sheath,the plangent cartridge heater’s watt density can reach 25 w/cm² and their operating temperature can go up to 800°C (1472°F)，Flange Cartridge Heater
Read More
RTD PT100 Sensor These rigid sensors have a stainless steel welded closure end sheath.The Pt100 sensor is 10mm long and sits on top of the jacket, which means a minimum immersion depth of at least 50mm.The sensor is rated at 250 ° C.RTD...
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
SSR solid state relays are electronic non-contact switches. The main features are small control signal input, directly driving large current loads. It is widely used with temperature control instruments
Read More
Tubular Heating Elements is industrial heaters, and the most versatile, dependable and rugged of any heat generating device. These qualities make Tubular Heating Elements an ideal heat source for many applications.
Read More
Using a thermocouple will allow higher temperature readings than conventional thermistors.The k thermocouple has a temperature range of 0-600 ℃, which is more than enough for any thermocouple on the market.K Type Thermocouple Range
Read More
Cast-in liquid cooled barrel heaters are the most common cast -in heater design. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting.Cast in Heater
Read More
Submersible Oil Heater,The surface power of the heating tube is 5.6w/cm2, which is suitable for liquid heating with good fluidity, less solid deposition and no crystallization of the liquid on the surface of the electric heater after...
Read More
Sainless Steel thick film heating element is one of industrial heaters,it can be used on various home and industrial appliances such as water heaters. It is with stable sheet resistance, and good printing performance.
Read More
The grounded heating element provides a high-watt density, ensuring rapid heating times — one inch thick fiberglass insulation prevents heat loss. Prevent further heat loss by ordering the drum insulation top cover (optional) below.Drum...
Read More
Infrared Ceramic Resistance Compared with traditional steam, hot air and resistance heating methods, far-infrared heating has many advantages, such as fast heating speed, good quality of new products, small area of equipment, low...
Read More
1. Special high temperature and strength aluminum alloy case can resist to high temperature 500C, high voltage (220V to 600V), long life, jacket specifications diameter 4mm, 5mm and 6mm.
2. Silicone rubber shell can resist to...