RTD PT100 Sensor These rigid sensors have a stainless steel welded closure end sheath.The Pt100 sensor is 10mm long and sits on top of the jacket, which means a minimum immersion depth of at least 50mm.The sensor is rated at 250 ° C.RTD...
Read More
Ceramic Rod Ceramic Tube for thermocouple or heater 1800C 9 alumina Al2O3 ceramic bar is our main product.We are producing high quality alumina ceramic rods. With 99.7% alumina as the main raw material, 85% and 95% alumina rods are...
Read More
One of the most popular coil heater is Hot Runner resistance.Hot runner resistance is an advance concept of thermal engineering which has a construction similar to high wattage density cartridge heaters.Hot Runner Resistance
Read More
The tank-heating Elements can have a service life of up to 10,000 hours and have the power saving function, saving 20% energy compared with ordinary heaters of the same power
Read More
The tank-heating Elements can have a service life of up to 10,000 hours and have the power saving function, saving 20% energy compared with ordinary heaters of the same power
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
Quartz Tube Heating Element Common quartz tube heating elements is made of milky or transparent quartz glass tube of special technology and resistance alloy wire as heating unit .Because of high temperature wall tube,so it is only...
Read More
Submersible Oil Heater,The surface power of the heating tube is 5.6w/cm2, which is suitable for liquid heating with good fluidity, less solid deposition and no crystallization of the liquid on the surface of the electric heater after...
Read More
Ocr25Al5 Wire Widely used in industrial furnace, household appliances, metallurgy, machinery, aircraft, automobile, military and other industries to produce heating elements and resistance components. Ocr25Al5 Wire
Read More
Thick film heaters or calls Thick film heating elements are manufactured in a completely different way than ordinary heating elements. A thick film heating element consists of a stainless steel or ceramic substrate (plate) Thick Film...
Read More
Polyimide film thin heater is an organic film with very high dielectric capability, thin profile and low thermal mass, while providing superior resistance to most solvents, acids, and radiation. In connection with these features...
Read More
All of Tsheater’s mica nozzle heaters are constructed from the best quality materials, ensuring high dielectric strength and maximum heat transfer. Using the highest quality nickel chrome resistance tape.Nozzle Heater Bands
Read More