Silicone Heat Mat Capable of operating with excellent performance under many adverse conditions, the low thermal mass of flexible heaters allows their use in applications where the space for placing a heater is limited and weight is a...
Read More
ptfe heaters，Excellent corrosion resistance. features PTFE casing 304 stainless steel elements are inert to up to 212°F(100°C) in most solutions. Low power density design 10 watts per square inch (1.5 w/cm). 4 ft (1.2 m) continuous...
Read More
Using a thermocouple will allow higher temperature readings than conventional thermistors.The k thermocouple has a temperature range of 0-600 ℃, which is more than enough for any thermocouple on the market.K Type Thermocouple Range
Read More
It’s a versatile and economical heat source for a wide variety of industrial and commercial applications.Standard tube diameters are 6mm, 8mm, 10mm, 12mm, 16mm,18mm,20mm etc ,other special sizes are available for Finned strip...
Read More
Flange Cartridge Heater Protected with a stainless steel sheath,the plangent cartridge heater’s watt density can reach 25 w/cm² and their operating temperature can go up to 800°C (1472°F)，Flange Cartridge Heater
Read More
Silicone Heat Mat Capable of operating with excellent performance under many adverse conditions, the low thermal mass of flexible heaters allows their use in applications where the space for placing a heater is limited and weight is a...
Read More
Quartz glass heater utilize a low-mass tungsten filament that is incased in a special blend of inert gasses. This provides a very high energy source capable of responding instantly to voltage changes Quartz Glass Heater
Read More
All of Tsheater’s mica nozzle heaters are constructed from the best quality materials, ensuring high dielectric strength and maximum heat transfer. Using the highest quality nickel chrome resistance tape.Nozzle Heater Bands
Read More
Cast-in liquid cooled barrel heaters are the most common cast -in heater design. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting.Cast in Heater
Read More
PTFE Single Tubular Spiral Heaters，The furnace at the side vertical or horizontal bottom is composed of thick gauge metal elements covered with a thick-walled fluoropolymer (PTFE).PTFE Single Tubular Spiral Heaters，Teflon (set) tube is...
Read More
The Industrial Tank Heater is made of sanitary seamless stainless steel tube with strong corrosion resistance and suitable for heating low concentration alkaline liquid
Read More
Depending on their rating, sheath and shape, industrial tubular heaters are used in a variety of industrial heating applications (conduction, convection, radiation heating) that require process temperatures of up to 750°C (1 382°F) to...
Read More