Electric immersion heater consists of metal tube, spiral resistance wire and crystal magnesium oxide powder with good thermal conductivity and insulation.Electric Immersion Heater，Electric Immersion Heater Mainly used for water heating
Read More
Flexible tubular heaters make the heating of complex platens, shapes, and machines, possible. Flexible tubular heaters are completely flexible, and may be shaped at will. Around pipes, along platen paths, and other challenging...
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
Ceramic band heaters are medium-to-high temperature heaters that have 600℃as a maximum working temperature. Electric Resistance Ceramic heater Bands provide long life and use less wattage (because of insulation) in plastics extrusion...
Read More
High Temperature Cartridge Heater,Cartridge heaters are an excellent choice to use as a conductive source for heating solid metal plates, blocks and dies or as a convective heat source for use in a variety of liquids and gases.High...
Read More
Thermocouple Connection Head The isolated HART intelligent temperature transmitter (round card) is used for the signal input of resistance temperature detector (RTD) and thermocouple (TC) and 4 - 20mA analog output of the two-wire...
Read More
Submersible Oil Heater,The surface power of the heating tube is 5.6w/cm2, which is suitable for liquid heating with good fluidity, less solid deposition and no crystallization of the liquid on the surface of the electric heater after...
Read More
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays, and since there are no moving contacts, solid state relays can be switched much faster and for much longer...
Read More
As one of the most widely used heating coils,Straight Hot Runner Heater have many types,Straight is the one of them.After the customer buys it back, he can bend it to the size he wants according to the needs of his own machine.Straight...
Read More
RTD PT100 Sensor These rigid sensors have a stainless steel welded closure end sheath.The Pt100 sensor is 10mm long and sits on top of the jacket, which means a minimum immersion depth of at least 50mm.The sensor is rated at 250 ° C.RTD...
Read More
1. Special high temperature and strength aluminum alloy case can resist to high temperature 500C, high voltage (220V to 600V), long life, jacket specifications diameter 4mm, 5mm and 6mm.
2. Silicone rubber shell can resist to...
Depending on their rating, sheath and shape, industrial tubular heaters are used in a variety of industrial heating applications (conduction, convection, radiation heating) that require process temperatures of up to 750°C (1 382°F) to...
Read More