Constructed with a mica core wound with wire which call mica band heater . The core is then bent into a circle band. Leads are attached before the final outer sheaths are attached to complete the heater.Heater Mica
Read MoreSubmersible Oil Heater,The surface power of the heating tube is 5.6w/cm2, which is suitable for liquid heating with good fluidity, less solid deposition and no crystallization of the liquid on the surface of the electric heater after...
Read MoreSSR solid state relays are electronic non-contact switches. The main features are small control signal input, directly driving large current loads. It is widely used with temperature control instruments
Read MoreCeramic band heaters are medium-to-high temperature heaters that have 600℃as a maximum working temperature. Electric Resistance Ceramic heater Bands provide long life and use less wattage (because of insulation) in plastics extrusion...
Read MoreCarbon fiber sleeve is made of special carbon fiber yarn, which has amazing strength, high heat resistance and extremely light weight.Our carbon fiber sleeve will form itself to accommodate uneven or asymmetrical surfaces while...
Read MoreFinned Tube Heater is one of industrial heaters,It is most widely used in industrial heaters.In applications where tubular heaters are exposed to forced convection, placing fins around tubular heaters increases their surface area and...
Read MoreFrom manual to fully automated, our modular GT-610 Series of precision Infeed/Thrufeed Centerless Grinders are able to remove more material faster, and with better surface finishes, than competing machines.Centerless Grinder
Read Moreptfe heaters,Excellent corrosion resistance. features PTFE casing 304 stainless steel elements are inert to up to 212°F(100°C) in most solutions. Low power density design 10 watts per square inch (1.5 w/cm). 4 ft (1.2 m) continuous...
Read MoreThermocouple Wire The purpose of this section is to serve as a guide for selecting conductors to meet the requirements of most temperature measurements.It is characterized by a wide selection of conductors, insulating materials and...
Read MoreWater Tank with Immersion Heater : 1 100% guaranteed no leakage welding; 2. Excellent sealing performance; 3. Limited protection against safety accidents caused by heaters.
Read MoreFrom manual to fully automated, our modular GT-610 Series of precision Infeed/Thrufeed Centerless Grinders are able to remove more material faster, and with better surface finishes, than competing machines.Centerless Grinder
Read MoreCeramic Rod Ceramic Tube for thermocouple or heater 1800C 9 alumina Al2O3 ceramic bar is our main product.We are producing high quality alumina ceramic rods. With 99.7% alumina as the main raw material, 85% and 95% alumina rods are...
Read More