Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
As one of the most widely used heating coils,Straight Hot Runner Heater have many types,Straight is the one of them.After the customer buys it back, he can bend it to the size he wants according to the needs of his own machine.Straight...
Read More
This Coil Heater from our factory is suitable for Plastic Machine, and the price is very favorable.
Read More
As a very widely used heater,Heater Cartridge Construction permits higher watt densities. Standard SS316 and optional Incoloy 800 sheath provide good thermal conductivity and resistance to corrosion and scaling.Heater Cartridge
Read More
l right angle cartridge heater，The cartridge heater is made of metal tube as a foreigner to load high-resistance electrothermal alloy wire as heating material, filled and compacted around the heating wire, has good insulation...
Read More
Flange Cartridge Heater Protected with a stainless steel sheath,the plangent cartridge heater’s watt density can reach 25 w/cm² and their operating temperature can go up to 800°C (1472°F)，Flange Cartridge Heater
Read More
Sheath Heater Dynamic heating elements that combine the functions of heating and temperature control in one element. A PTC (positive temperature coefficient) heater is embedded in a silicone compound with excellent heat transfer and...
Read More
Industrial Cartridge Heaters is generally used for air-drying or heating the liquid, and the heating liquid can be screwed at the top of the heating tube to prevent movement. Air dry burning mainly refers to the heating of the...
Read MoreFinned heaters are constructed using Tempco’s robust tubular element as the basis of construction. Fin material is continuously spiral wound tightly onto the element surface to ...
These tubular heaters minimize the risk of sparks and fire from combustible particles in the flow stream, making them a safer choice than open coil heaters. Finned for increased surface area, ...
Steel finned tubular heaters are standard with surface temperatures limited to about 425ºC (797ºF) compared to 815ºC (1500ºF) for an alloy sheathed non-finned heater. Some ...
Jun 19, 2017 · SWD Industrial Finned Tubular Heaters Provides background or comfort heat in damp or corrosive environments Widely used in water treatment plants Rugged stainless steel construction with IP66 and IP67 rating Outputs from 500W to 4kW with or without built-in thermostat Range & Prices Tech Spec Selection Enquiries Images Downloads Videos...
Finned Tubular Heaters. Immersion Heaters for Liquids. Flange-Mount Immersion Heaters for Water. Bolt the flange to a matching flange welded on a container wall. Compact Screw-Plug Immersion Heaters for Water. Efficiently heat liquid in small containers....
Open Coil Duct Heaters. For most simple space heating comfort heating applications, open coil models are the most cost-effective solution as they tend to have lower kW and are smaller in size than a finned tubular unit. The most important differentiator is that the open coil element releases its heat directly into the airstream, which allows ......
