Polyimide PI heating film is made of polyester amide film as external insulation material and metal foil as internal conductive heating material, which is heated under high temperature and high pressure for a long time.
Read More
Cast-in liquid cooled barrel heaters are the most common cast -in heater design. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting.Cast in Heater
Read More
Electronic components, IC, electrical appliances, mobile phones, plastic buttons, color paper, food packaging, clocks and watches, molds, gaskets and seals, bearing, auto parts, hardware, tools, building materials, PVC tubes, etc.Laser...
Read More
U Type Defrost Heating Tube Performance and application of melting (melting) frost electric heat pipe: melting (melting) frost electric heat pipe is an electrical element designed and developed for electric heating frost on various...
Read More
The grounded heating element provides a high-watt density, ensuring rapid heating times — one inch thick fiberglass insulation prevents heat loss. Prevent further heat loss by ordering the drum insulation top cover (optional)...
Read More
The Industrial Tank Heater is made of sanitary seamless stainless steel tube with strong corrosion resistance and suitable for heating low concentration alkaline liquid
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
The grounded heating element provides a high-watt density, ensuring rapid heating times — one inch thick fiberglass insulation prevents heat loss. Prevent further heat loss by ordering the drum insulation top cover (optional) below.Drum...
Read More
RTD PT100 Sensor These rigid sensors have a stainless steel welded closure end sheath.The Pt100 sensor is 10mm long and sits on top of the jacket, which means a minimum immersion depth of at least 50mm.The sensor is rated at 250 ° C.RTD...
Read More
ptfe heaters，Excellent corrosion resistance. features PTFE casing 304 stainless steel elements are inert to up to 212°F(100°C) in most solutions. Low power density design 10 watts per square inch (1.5 w/cm). 4 ft (1.2 m) continuous...
Read More
It’s a versatile and economical heat source for a wide variety of industrial and commercial applications.Standard tube diameters are 6mm, 8mm, 10mm, 12mm, 16mm,18mm,20mm etc ,other special sizes are available for Finned strip...
Read More
Ocr25Al5 Wire Widely used in industrial furnace, household appliances, metallurgy, machinery, aircraft, automobile, military and other industries to produce heating elements and resistance components. Ocr25Al5 Wire
Read More