Can be installed in a blower pipe or other stationary, mobile air heating occasions;In metal stamping, machinery manufacturing, automobile, textile, food, household appliances and other industries, especially in air conditioner air...
Read More
We have been catering the increasing need of clients by offering pristine grade Tubular heating element. For installing in heat exchangers, offered tubes are highly demanded the market.Tubular Heating Element
Read More
Polyimide film thin heater is an organic film with very high dielectric capability, thin profile and low thermal mass, while providing superior resistance to most solvents, acids, and radiation. In connection with these features...
Read More
Submersible Oil Heater,The surface power of the heating tube is 5.6w/cm2, which is suitable for liquid heating with good fluidity, less solid deposition and no crystallization of the liquid on the surface of the electric heater after...
Read More
PTFE Single Tubular Spiral Heaters，The furnace at the side vertical or horizontal bottom is composed of thick gauge metal elements covered with a thick-walled fluoropolymer (PTFE).PTFE Single Tubular Spiral Heaters，Teflon (set) tube is...
Read More
ptfe heaters，Excellent corrosion resistance. features PTFE casing 304 stainless steel elements are inert to up to 212°F(100°C) in most solutions. Low power density design 10 watts per square inch (1.5 w/cm). 4 ft (1.2 m) continuous...
Read More
1. Special high temperature and strength aluminum alloy case can resist to high temperature 500C, high voltage (220V to 600V), long life, jacket specifications diameter 4mm, 5mm and 6mm.
2. Silicone rubber shell can resist to...
Ceramic band heaters are medium-to-high temperature heaters that have 600℃as a maximum working temperature. Electric Resistance Ceramic heater Bands provide long life and use less wattage (because of insulation) in plastics extrusion...
Read More
Spring Coil Heater Made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with MgO powder and compacted for faster and efficient heat transfer. Spring coil heater are annealed to acquire malleability for...
Read More
Cr20Ni80 is a resistant electric heating alloy. Stable microstructure and electrical and physical properties, good high-temperature mechanical properties, good cold deformation plasticity, good weldability, and long-term use without...
Read More
Oil Immersion Heaters Tubular heating element consists of metal tube, spiral resistance wire and crystal magnesium oxide powder with good thermal conductivity and insulation.A product that heats the system.The electric heating tube is...
Read More
Thermocouple Connection Head The isolated HART intelligent temperature transmitter (round card) is used for the signal input of resistance temperature detector (RTD) and thermocouple (TC) and 4 - 20mA analog output of the two-wire...
Read More