K Type Thermocouple Type K is very common in nuclear applications due to its relative radiation hardness.The highest continuous temperature is about 1100℃.Type K thermocouples usually work in most applications because they are...
Read More
SSR solid state relays are electronic non-contact switches. The main features are small control signal input, directly driving large current loads. It is widely used with temperature control instruments
Read More
High Temperature Cable insulating layer, the first layer insulation material for alkali-free glass fiber woven layer, the second choose 0.15 mm thick insulation, overlapping rate was 50%, heat-resistant up to 1000 ℃ of composite mica...
Read More
PTFE Single Tubular Spiral Heaters，The furnace at the side vertical or horizontal bottom is composed of thick gauge metal elements covered with a thick-walled fluoropolymer (PTFE).PTFE Single Tubular Spiral Heaters，Teflon (set) tube is...
Read More
Hot Nozzle Runner Coil Heater.It can be offered with J ytpe thermocouple or K type thermocouple.Can be produced according to customer needs.Coil heaters are used in hot runner moulds, sprue bush and on nozzles.Hot Nozzle Runner Coil Heater
Read More
Electric Kettle Heating Element Suitable for most heating equipment.They are easy to form and have the highest mechanical stability and electrical properties.Although resistance heaters are technically mature and widely used, there are...
Read More
We have been catering the increasing need of clients by offering pristine grade Tubular heating element. For installing in heat exchangers, offered tubes are highly demanded the market.Tubular Heating Element
Read More
Thermocouple Cable Use of waterproof, oil-proof, anti-corrosion and high temperature PTFE layer and pure copper silver-plated wire. This thermocouple wire can be used to make your own thermocouples for a wide range of applications, or...
Read More
This product is made of glass fiber woven tube coated with polyurethane resin and treated at high temperature.Polyurethane resin coating and high temperature treatment make polyurethane glass fiber sleeve with good flexibility and...
Read More
1. Materials :201, 202, 304, 304L, 316, 316L, 409, 430,440a, etc.
2. Standards :ASTM, JIS, DIN, EN, GB
3. Thickness :0.5-100mm or customer's requirement
4. Outside diameter :0.6m or customer's requirement
Flange Cartridge Heater Protected with a stainless steel sheath,the plangent cartridge heater’s watt density can reach 25 w/cm² and their operating temperature can go up to 800°C (1472°F)，Flange Cartridge Heater
Read More
High Density Cartridge Heaters,Great Source Cartridge heateris a piece of equipment, made of MgO powder, MgO tube,ceramic cap,resistance wire(NiCr2080),High temperature leads,seamless stainless steel sheath(304,321,316,800,840).High...
Read More