We take pleasure to introduce ourselves as one of the foremost firm of a wide range of Swaging Dies. Techniques used in manufacturing process are highly modern and enables us to append much-needed touch of uniqueness to these dies....
Read MoreSilicone Heat Mat Capable of operating with excellent performance under many adverse conditions, the low thermal mass of flexible heaters allows their use in applications where the space for placing a heater is limited and weight is a...
Read MorePTFE Single Tubular Spiral Heaters,The furnace at the side vertical or horizontal bottom is composed of thick gauge metal elements covered with a thick-walled fluoropolymer (PTFE).PTFE Single Tubular Spiral Heaters,Teflon (set) tube is...
Read MoreHigh Temperature Cartridge Heater,Cartridge heaters are an excellent choice to use as a conductive source for heating solid metal plates, blocks and dies or as a convective heat source for use in a variety of liquids and gases.High...
Read MoreRTD PT100 is suitable for the measurement of liquids and gases across a wide temperature range of -50 to +300°C and the 3 wire Class sensor gives excellent accuracy across the full measuring range.The lead wire is usually copper...
Read MoreUsing a thermocouple will allow higher temperature readings than conventional thermistors.The k thermocouple has a temperature range of 0-600 ℃, which is more than enough for any thermocouple on the market.K Type Thermocouple Range
Read MoreManufactures its PTFE coated fiberglass tape using the latest coating technology. First we impregnate the fiberglass substrate, then lay down multiple coats of PTFE to build pure PTFE thickness and finally PTFE Teflon Tape
Read MoreTS heater are leading manufacturer, Importers and Service Provider of Aluminum Cast-In Heaters and our product is made up of good quality.Right Angle Aluminum Casting Electric Heaters
Read MoreCeramic Heater Plate are manufactured in a casting process embedding the resistance wire in the ceramic material. Standard colors are black and traditional white.
Read MoreRTD PT100 is suitable for the measurement of liquids and gases across a wide temperature range of -50 to +300°C and the 3 wire Class sensor gives excellent accuracy across the full measuring range.The lead wire is usually copper...
Read MoreSilicone Heat Mat Capable of operating with excellent performance under many adverse conditions, the low thermal mass of flexible heaters allows their use in applications where the space for placing a heater is limited and weight is a...
Read MoreThermocouple Wire The purpose of this section is to serve as a guide for selecting conductors to meet the requirements of most temperature measurements.It is characterized by a wide selection of conductors, insulating materials and...
Read More