PTFE of Immersion Heater Hot Water Tank is made of imported raw materials such as TEFLON and FLON, used in highly corrosive liquid such as strong acid and alkali. Immersion Heater Hot Water Tank has excellent anti-aging property and...
Read More
Silicone Heat Mat Capable of operating with excellent performance under many adverse conditions, the low thermal mass of flexible heaters allows their use in applications where the space for placing a heater is limited and weight is a...
Read More
Thermocouple Cable Use of waterproof, oil-proof, anti-corrosion and high temperature PTFE layer and pure copper silver-plated wire. This thermocouple wire can be used to make your own thermocouples for a wide range of applications, or...
Read More
Temperature Sensor RTD PT100 Terminals: aluminium head with threaded cover and chain, different types of terminals. The end of the element is a nickel-plated brass terminal mounted on a high purity ceramic terminal block.Temperature...
Read More
Carbon fiber sleeve is made of special carbon fiber yarn, which has amazing strength, high heat resistance and extremely light weight.Our carbon fiber sleeve will form itself to accommodate uneven or asymmetrical surfaces while...
Read More
Thermocouple connectors are specially designed to allow thermocouples to connect and disconnect quickly from extension wires.The connector pair consists of a male plug and a female jack.The male plug will have two single thermocouples...
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
Ocr25Al5 Wire Widely used in industrial furnace, household appliances, metallurgy, machinery, aircraft, automobile, military and other industries to produce heating elements and resistance components. Ocr25Al5 Wire
Read More
Infrared Ceramic Heaters It is the resistance wire Cr20Ni80 for heating, ceramic insulation and thermal conductivity.Resistance wires are cast into ceramics and then fired at high temperatures.Infrared Ceramic Heaters
Read More
RTD PT100 Sensor These rigid sensors have a stainless steel welded closure end sheath.The Pt100 sensor is 10mm long and sits on top of the jacket, which means a minimum immersion depth of at least 50mm.The sensor is rated at 250 ° C.RTD...
Read More
As a very widely used heater,Heater Cartridge Construction permits higher watt densities. Standard SS316 and optional Incoloy 800 sheath provide good thermal conductivity and resistance to corrosion and scaling.Heater Cartridge
Read More
Using a thermocouple will allow higher temperature readings than conventional thermistors.The k thermocouple has a temperature range of 0-600 ℃, which is more than enough for any thermocouple on the market.K Type Thermocouple Range
Read More