The grounded heating element provides a high-watt density, ensuring rapid heating times — one inch thick fiberglass insulation prevents heat loss. Prevent further heat loss by ordering the drum insulation top cover (optional)...
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More
Variable temperature control is available with the adjustable thermostat with a heating range up to 392ºF. A drum heater is useful for a range of barrel heater options (temperature can vary due to the maximum temperature of liquids).
Read More
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays, and since there are no moving contacts, solid state relays can be switched much faster and for much longer...
Read More
ptfe heaters，Excellent corrosion resistance. features PTFE casing 304 stainless steel elements are inert to up to 212°F(100°C) in most solutions. Low power density design 10 watts per square inch (1.5 w/cm). 4 ft (1.2 m) continuous...
Read More
Variable temperature control is available with the adjustable thermostat with a heating range up to 392ºF. A drum heater is useful for a range of barrel heater options (temperature can vary due to the maximum temperature of liquids).
Read More
Ceramic band heaters are medium-to-high temperature heaters that have 600℃as a maximum working temperature. Electric Resistance Ceramic heater Bands provide long life and use less wattage (because of insulation) in plastics extrusion...
Read More
Infrared Ceramic Heaters It is the resistance wire Cr20Ni80 for heating, ceramic insulation and thermal conductivity.Resistance wires are cast into ceramics and then fired at high temperatures.Infrared Ceramic Heaters
Read More
Cast-in liquid cooled barrel heaters are the most common cast -in heater design. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting.Cast in Heater
Read More
Polyimide PI heating film is made of polyester amide film as external insulation material and metal foil as internal conductive heating material, which is heated under high temperature and high pressure for a long time.
Read More
KSD301 is recognized by organizations around the world and is widely used for regulating thermal switches, overtemperature controls, or pilot work control switches, depending on its configuration and applicatio,KSD301 Thermostat
Read More
Copper Hot Runner Heater is a kind of energy-saving equipment . it is installed in the combustion equipment before combusting, the high temperature (105 DEG -150 DEG) issued to reduce the fuel oil viscosity, promote full...
Read More