Finned Heaters The finned belt heater is filled with highly compressed MgO insulation that transfers heat from the nickel-chromium wire to the outer sheath.The spacing between the fins maximizes surface contact, so that heat is...
Read More
High Temperature Cable insulating layer, the first layer insulation material for alkali-free glass fiber woven layer, the second choose 0.15 mm thick insulation, overlapping rate was 50%, heat-resistant up to 1000 ℃ of composite mica...
Read More
Electric immersion heater consists of metal tube, spiral resistance wire and crystal magnesium oxide powder with good thermal conductivity and insulation.Electric Immersion Heater，Electric Immersion Heater Mainly used for water heating
Read More
Cast-in liquid cooled barrel heaters are the most common cast -in heater design. The liquid cooling tubes run symmetrical to the heater element, which provides a uniform cooling pattern across the body of the casting.Cast in Heater
Read More
High Temperature Cable insulating layer, the first layer insulation material for alkali-free glass fiber woven layer, the second choose 0.15 mm thick insulation, overlapping rate was 50%, heat-resistant up to 1000 ℃ of composite mica...
Read More
Industrial heaters-coil heater As an Industrial heaters supplier,Hot runner coil heater is made of nickel chrome resistance wire placed inside chrome nickel steel tube filled with Mgo powder and compacted for faster and efficient...
Read More
Grill heating elements has simple structure, high thermal efficiency, good mechanical strength and good adaptability to harsh environment.It can be used for heating all kinds of liquids and acid, base and salt as well as for melting...
Read More
Teflon Tape is a 5 mil pure skived Teflon (PTFE film) tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness / coil wraps & separators Teflon Tape Fiberglass...
Read More
Cartridge heater has many types, this products is stainess steel heating element, mainly used for 3D print,packing machine,labelling machines and hot stamping etc They are also commonly found used in the chemical,electronics,medical...
Read More
This product is made of glass fiber woven tube coated with polyurethane resin and treated at high temperature.Polyurethane resin coating and high temperature treatment make polyurethane glass fiber sleeve with good flexibility and...
Read More
RTD PT100 is suitable for the measurement of liquids and gases across a wide temperature range of -50 to +300°C and the 3 wire Class sensor gives excellent accuracy across the full measuring range.The lead wire is usually copper...
Read More
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays, and since there are no moving contacts, solid state relays can be switched much faster and for much longer...
Read More