Technical Characteristics Of Air Heaters

1, the air can be heated to a very high temperature, up to 850 ° C, the shell temperature is only about 50 ° C.

2, high efficiency: up to 0.9 or more.

3, heating and cooling rate block, up to 10 ° C / S, fast and stable adjustment. There is no leading air temperature lead and hysteresis, which makes the temperature control drift, which is suitable for automatic control.

4, good mechanical properties: because its heating element is a special alloy material, so under the impact of high-pressure air flow, it is better than any heating body mechanical properties and strength, which is necessary for a long time continuous air heating System and accessory testing is even more advantageous.

5. It is durable and has a service life of several decades without violating the use rules.

6, the air is clean, small size.

The air electric heater is mainly used to heat the required air flow from the initial temperature to the required air temperature up to 850 degrees Celsius. It has been widely used in many research and production laboratories such as aerospace, weapons industry, chemical industry and higher education institutions. It is especially suitable for automatic temperature control and high flow high temperature combined system and accessory test. Air electric heaters are used in a wide range: they can heat any gas, and the hot air produced is dry, non-conductive, non-conductive, non-flammable, non-explosive, non-chemically corrosive, non-polluting, safe and reliable, and heated up quickly. Controllable).

Control part: the increase of the control part increases the use of the air heater. In the wiring state, the electric control cabinet opens the heating switch, and the heating element is automatically heated. When the heating element reaches the set stable value, the temperature controller outputs a control signal. Through a series of instruments to control the start and stop of the heating element, to achieve the purpose of automatic temperature control!