Hot Nozzle Runner Coil Heater.It can be offered with J ytpe thermocouple or K type thermocouple.Can be produced according to customer needs.Coil heaters are used in hot runner moulds, sprue bush and on nozzles.Hot Nozzle Runner Coil Heater
We have won the recognition of our customers by virtue of the advantages of high quality and low price, timely delivery, and thoughtful after-sales service, and our k type connector, hot runner coil heater, gas heater ceramic plates are exported to various countries and regions in the world. Our mission is to deliver consistently superior value to our customers and their clients. Clients to start with!
Hot Nozzle Runner Coil Heater.
It can be offered with J ytpe thermocouple or K type thermocouple.Can be produced according to customer needs.Coil heaters are used in hot runner moulds, sprue bush and on nozzles.
They provide a wide contact area which helps in achieving high levels of heat transfer and thermal conductivity.
Hot Nozzle Runner Coil Heater
Working temperature of 700 deg C is attainable and the optimal insulation helps in achieving long life.
1.High Efficient Spiral Cable Hot nozzle runner coil heater also know as cable heaters can be formed to a variety of shapes as required by its many application.
2.Frequenty though,Hot nozzle runner coil heater are configured as samll diameter,high performance nozzle heaters that are fully annealed.
3.Coil heates are use on injection molding machine nozzles and sprue bushings supplying bushings supplying 360 degree of heat with optional distributed wattage available.
4.Coil heaters are also used as cartridge heaters where irregular size bores are found.A straight,round cable heater can snake through a seal in packaging equipment installations. Hot Nozzle Runner Coil Heater
Heating section | 2.2x4.2mm 3x3mm 3.4x3.4mm 3.5x3.5m 4x4mm |
Heating coil ID | 8mm~40mm |
Heating ring height | 10mm~200mm |
Voltage | 15V~380V |
Wattages | 200W~3000W |
Build-in thermocouple power | With or without J/K thermocouple |
Lead wire | 500/1000/1200/1500/2000mm |
Section Area:Hot Nozzle Runner Coil Heater
3.0 x 3.0, 3.30 x 3.30, 3.5 x 3.5, 4 x 4,4.20 x 2.20,4.20 x 2.50
Maximum Sheath Temperature: 700°C-1100°C
Die Electrical Strength: 800V A/C
Thermocouple: J type (Standard) or K type
Length Tolerance (Straight): +/-5%
MOQ: 1 PCS
Sheath Material | Cr Ni-Steel |
Insulation Material | Mgo rods |
Resistance Wire | Cr 20Ni 80 |
Maximum Sheath Temperature | 700° |
Die Electrical Strength | 800V |
Insulation | ＞5MW |
Length Tolerance (Straight) | 4% |
Thermocouple | K or J type thermocouple |
Wattage Tolerance | +10%(+5% Available Upon Request) |
Resistance Tolerance | +10%(+5% Available Upon Request) |
Unheated Length | 50mm (Standard) |
Dimensional Tolerance | Coil Length +1mm |
Why chose us?
1.As a professional hot runner coil heater manufacturer, we have designed and produced for a large number coil heaters for our clients , and we have been working hard to become an excellent supplier.
2.After long-term exploration, our Hot runner nozzle coil heater are continuously improved to meet the growing needs of our customers, and we strive to satisfy every customer.
We continue to develop, and take the responsibility of providing high-performance, high-quality, and high-efficiency Customized Mold Components Rollers Guide Bushes Sleeves Pins Hot Runner Nozzle Tips Auto ... as our mission. So please will not hesitate to call us. We have honored to receive recognition from our customers.
