Electric Flange Immersion Tubular Heater for Water & Oil Heating

Over the years, with the experience of solving practical production applications for customers, we have absorbed the essence of similar products at home and abroad to further improve the design and performance of our heating jacket for drum, hot gas defrost, dimplex tubular heater. Our enterprise normally at your provider anytime. After several years of accumulation, continuous technological upgrades and optimization of system products, we have gradually formed our own strong resource integration capabilities and operational capabilities. Long-term partnership and fruitful cooperation is our goal, we hope that with our strong spirit of innovation and initiative, can accompany our customers and partners struggle together. Welcome to Visit our factory.

Immersion Water Heater Immersion water heater is made of stainless steel pipe with spiral heating wire as heating element.Fully comply with GB/T241993 electrical and electronic products basic environmental test procedures, and gb4706.1-19921 household and similar electrical safety requirements.

Performance:
Immersion Water Heater

1. Stable electrical performance, stable electric heating power, rapid heating, electric heating conversion rate up to 70%.
2. High thermal efficiency, no oxidation during heating, safe and reliable service life of more than 6000 hours.
3. The light emitted during work is mainly visible light and near-infrared light, more than 84% of which are concentrated in regions ranging from 0.75 micron to 3.5 micron.
It can be widely used in industrial, agricultural and civil fields of air heating.

Technical data:
Immersion Water Heater

1) Reference voltage: 220V/380V
2) Heat pipe diameter: 8.5 Φ - Φ 22
3) Heating tube: SS304 stainless steel, SL316 stainless steel 2520 stainless steel 2580 stainless steel titanium material stainless steel, no.10 steel, copper
4) Main power: 3KW -- 500KW
5) Working pressure: 1.0mpa -- 3.0mpa
6) Thread head material: stainless steel, carbon steel, copper.
(this product can be customized according to customers' requirements. Drawings, voltage, power and size can be provided.)

Type of industrial tubular heaters:

TS heater Founded in 2009, belong to factory investment company, with strong technical & products knowledge support. TS focused on electric & industry heaters’ technology research, development,co-production and sales. Mainly engaged in electric heating tube,shaped tubular heater ,cartridge heater, Teflon heater, Hot runner heater, cast in aluminum/iron/brass heater,,Thermocouple, TC ,RTD pt100, Nickel Chrome Cr20Ni80, Heating cable, Blanket Drum heater, Silicone heater, Mica band heater, Ceramic heater, ........

All the products are widely used in electroplating, chemical, plastics, machinery

We are relentless in our pursuit of technological innovation, pushing forward our Electric Flange Immersion Tubular Heater for Water & Oil Heating upgrades and the development of our industry. With the aim of 'compete with good quality and develop with creativity' and the service principle of 'take customers' demand as orientation', we will earnestly provide qualified products and solutions and good service for domestic and international customers. The future development of the company will take the culture of the times as the root, with nature-oriented thinking, and serve the community!