Constructed with a mica core wound with wire which call mica band heater . The core is then bent into a circle band. Leads are attached before the final outer sheaths are attached to complete the heater.Heater Mica
With advanced technology, relentless pursuit for innovation and dedicated engineers, we have become the professional hot gas defrost, immersion water heater rod 1000 watt, resistance of immersion element manufacturer with a full range of products line. Up to now, our products have been exported to more than 60 countries and areas around the world. We will serve you with all sincerity! We firmly believe that the brand comes from the trust of customers, and only by focusing can we make a good brand.
Advantages of Heater Mica
1. Fast heat transfer, uniform heating and stable operation.
2, the temperature is not leakage, can save energy, cover touch not hot, safe work.
3. The product has high power. The power of ceramic strip threading is 0.5~1.5 times higher than ordinary ones Heater Mica
4, Europe and The United States high temperature resistant heating wire, with fast heat dissipation, heat uniform, stable high temperature and other characteristics, can be used at 600-800℃ for a long time.
5. Long product life, because raw materials age slowly at high temperature, so long product life.
6. Meet the technical requirements of NATIONAL GB.
Power deviation +5% ~ -10%.
7. Electrical strength: no breakdown in 1MIN after voltage 1500V /50Hz sinusoidal AC voltage test.
8. High mechanical strength, good thermal insulation performance, large contact surface with heated object, long service life.
9. Easy installation, maintenance and low cost of use. Even if the internal heating material is damaged, the external ceramic device can still be reused.
Properties of Heater Mica
Brief performance of ceramic heating ring: it is mainly applicable to extrusion, casting and underthrust mechanical operation temperature can reach 450 degrees, the maximum surface load is 6.5W/ CMM. It is characterized by long life and high temperature resistance, 30% reduction in energy consumption, high insulation, is the most suitable electrical heating products for extruders, injection molding machines, film blowing machines.
Heater Mica suitable for the industry
Plastic injection molding machine, chemical industry, chemical fiber, drying furnace, extrusion, medical infrared radiation treatment, casting and various pipe heating.
We are a professional company which is specialized in research and development, production and sales of Energy Saving Electric Patio Heaters Radiant Infrared Heater (JH-NR18-13B). If you have any interest or requirement of our products, we always welcome you to contact us at any time. As the cornerstone of modern civilization, we make our own contribution to improve the level of advanced productivity and promote the continuous accumulation of social wealth. We believe that the future will not only require a single individual to drive, but also rely on openness and coordination to create greater value and more new possibilities.
