Grill heating elements has simple structure, high thermal efficiency, good mechanical strength and good adaptability to harsh environment.It can be used for heating all kinds of liquids and acid, base and salt as well as for melting metals (lead, zinc, tin,) with low melting point.Grill Heating Elements
In the use of products, it can help customers to select the appropriate pt100 arduino, rtd 100, x ray machine price, and provide technical support for after-sales service. We have advanced production technology, reasonable price positioning, and perfect after-sales service, which have won the trust of our customers. Our strong comprehensive production capacity has been proved by market facts. At present, our company has won a good reputation with high quality products and sincere service attitude. You can see our products all over the world.
Grill heating elements has simple structure, high thermal efficiency, good mechanical strength and good adaptability to harsh environment.It can be used for heating all kinds of liquids and acid, base and salt as well as for melting metals (lead, zinc, tin,) with low melting point.
Electrical strength test:
A. Electrical strength in cold state: it shall be able to withstand 50Hz,1min withstand voltage, cut off current 5mA, without breakdown and flashover.
Rated voltage test voltage 250V 1250V
B. Electrical strength at operating temperature: 50Hz,1min withstand voltage, cut off current 5mA, no breakdown, flashover.
Rated voltage test voltage 250V 1000V
3. Leakage current at operating temperature
Under the condition of full heat release, the leakage current of the electric heat pipe is 0.5m A, with the input of 1.15 times rated power.
4. Overload test
Under the condition of sufficient heat release, the electric heat pipe is powered on with 1HRS of rated power 1.27 times, and cooled with 0.5HRS to room temperature (forced cooling is allowed) after power failure, so that the cycle is repeated for 30 times without damage.
5. Enclosure sealing test of electric heat pipe (pipe crack test)
The electric heat pipe shall be immersed in 3HRS of acidified water (2%-3% hydrochloric acid, sulfuric acid or nitric acid). The two end faces of the electric heat pipe shall be exposed to at least 5mm of liquid level. After testing, the performance requirements of item 2~3 shall be satisfied.
6. Sealing test
The electric heat pipe shall be placed at 24HRS in an environment with a temperature of 60℃ and a humidity of 95%, and shall meet the second to third performance requirements after being placed.
7. Life test
Under the condition of sufficient heat release, the electric heat pipe is powered on by 1HRS at rated voltage, and cooled by 0.5HRs to room temperature (forced cooling is allowed) after power off. The accumulative working time is up to 3000HRs.
Type of industrial tubular heaters:
TS heater Founded in 2009, belong to factory investment company, with strong technical & products knowledge support. TS focused on electric & industry heaters’ technology research, development,co-production and sales. Mainly engaged in electric heating tube,shaped tubular heater ,cartridge heater, Teflon heater, Hot runner heater, cast in aluminum/iron/brass heater,,Thermocouple, TC ,RTD pt100, Nickel Chrome Cr20Ni80, Heating cable, Blanket Drum heater, Silicone heater, Mica band heater, Ceramic heater, ........
All the products are widely used in electroplating, chemical, plastics, machinery
Our company's Factory Customized High Density Industrial Inject Immersion Cartridge Heater have gone through regular and irregular inspection, products are up to or exceed national standards or industry standards. Our enterprises are equipped with professional factory building, modern office environment, advanced production equipment and a group of high-quality talented employees. As a team and as individuals, we set ambitious goals and are committed to developing the skills that will enable us to succeed.
