Cast aluminum heater is mainly used for extrusion and casting moulding machines. It has a wide application in various machinery industries. The operation temperature can reach up to 300°C (Aluminium).Cast Aluminum Heaters
We have a group of high-quality management personnel and skilled workers, constantly strive to improve ourselves, provide customers with the best service, and contribute to the coil bolt heater, oven heating element resistance, coil heater for cooking industry. We believe that credibility is the life of the company, and take integrity as the principle of treating customers and the basic criterion of employees' work. Our management work is becoming more and more perfect since we take quality management as the center, meanwhile, the technical force is constantly increasing as we focus on the development and application of new products.
Cast aluminum heater is mainly used for extrusion and casting moulding machines. It has a wide application in various machinery industries. The operation temperature can reach up to 300°C (Aluminium).
Cast Aluminum Heaters
In order to concentrate the heat to one direction on the injection face, the other sides of the casting heaters t are covered by heat retention and heat insulation materials. So it has advantages such as advanced technology, high heat retention, long lifetime, anti-pollution, etc.
It is widely used in plastic extrusion, chemical fibre, blowing moulding machines.
Technical Parameters
Cast Aluminum Heaters
1. Conditions of use: ambient temperature -20 ° C ~ +60 ° C; relative humidity < 80%.
2, Electrical strength: can pass the voltage 1500V50HZ sinusoidal AC voltage withstand test, 1M1N without breakdown phenomenon under pressure.
3. Leakage current: <0.5MA.
4. Insulation resistance: >2MΩ.
5. Grounding resistance: <0.1Ω.
6, Power deviation value: +5% ~ -10%.
7, Temperature resistance: installed on the surface of the machine can be nearly 400 ° C.
Advantage
Cast Aluminum Heaters
1.It can be closely attached to the heated body.
2.Uniform heating
3.Good thermal conductivity
4.Long service life.
Client’s order ready to ship out:
Order Guide:
Please specify the following when ordering.
The inner diameter (mm) and length (mm) of heaters
Thickness of heaters
Terminal length (max & min) and the distance of terminal length
The diameter, length of cooling tubes and the distance between them.
Voltage and power density
Gap of two pieces if applicable
Wiring type and position
Whether need air blowers
Content of the stamping if needed
Order quantity
Delivery date
* It's better to provide us with the drawings/pictures
Others: position of terminal box, the position and size of the hole for connecting thermocouple OR of the incision, whether need to cast in the terminal
We always pursue the advanced international management mode and constantly absorb the advanced technology of international and domestic Flat Panel Solar Water Heater with Aluminum Alloy equipment industry. So please make contact with us by sending us emails or call us if you have any questions about our corporation. Facing the future, we will steadily promote high-quality development and deepen supply-side structural reforms.
