Hot Nozzle Runner Coil Heater.It can be offered with J ytpe thermocouple or K type thermocouple.Can be produced according to customer needs.Coil heaters are used in hot runner moulds, sprue bush and on nozzles.Hot Nozzle Runner Coil Heater
With the continuous improvement of consumers' requirements for products, we continue to introduce new ones, which makes our tubular element, ptfe tape, dimplex tubular heater attracts more and more consumers' attention with its unique structure and performance characteristics. Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions. Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to supply our buyers using the to start with amount getting and just after services practical experience. We always focus on sustainable development and scientific management.
Hot Nozzle Runner Coil Heater.
It can be offered with J ytpe thermocouple or K type thermocouple.Can be produced according to customer needs.Coil heaters are used in hot runner moulds, sprue bush and on nozzles.
They provide a wide contact area which helps in achieving high levels of heat transfer and thermal conductivity.
Hot Nozzle Runner Coil Heater
Working temperature of 700 deg C is attainable and the optimal insulation helps in achieving long life.
1.High Efficient Spiral Cable Hot nozzle runner coil heater also know as cable heaters can be formed to a variety of shapes as required by its many application.
2.Frequenty though,Hot nozzle runner coil heater are configured as samll diameter,high performance nozzle heaters that are fully annealed.
3.Coil heates are use on injection molding machine nozzles and sprue bushings supplying bushings supplying 360 degree of heat with optional distributed wattage available.
4.Coil heaters are also used as cartridge heaters where irregular size bores are found.A straight,round cable heater can snake through a seal in packaging equipment installations. Hot Nozzle Runner Coil Heater
Heating section | 2.2x4.2mm 3x3mm 3.4x3.4mm 3.5x3.5m 4x4mm |
Heating coil ID | 8mm~40mm |
Heating ring height | 10mm~200mm |
Voltage | 15V~380V |
Wattages | 200W~3000W |
Build-in thermocouple power | With or without J/K thermocouple |
Lead wire | 500/1000/1200/1500/2000mm |
Section Area:Hot Nozzle Runner Coil Heater
3.0 x 3.0, 3.30 x 3.30, 3.5 x 3.5, 4 x 4,4.20 x 2.20,4.20 x 2.50
Maximum Sheath Temperature: 700°C-1100°C
Die Electrical Strength: 800V A/C
Thermocouple: J type (Standard) or K type
Length Tolerance (Straight): +/-5%
MOQ: 1 PCS
Sheath Material | Cr Ni-Steel |
Insulation Material | Mgo rods |
Resistance Wire | Cr 20Ni 80 |
Maximum Sheath Temperature | 700° |
Die Electrical Strength | 800V |
Insulation | ＞5MW |
Length Tolerance (Straight) | 4% |
Thermocouple | K or J type thermocouple |
Wattage Tolerance | +10%(+5% Available Upon Request) |
Resistance Tolerance | +10%(+5% Available Upon Request) |
Unheated Length | 50mm (Standard) |
Dimensional Tolerance | Coil Length +1mm |
Why chose us?
1.As a professional hot runner coil heater manufacturer, we have designed and produced for a large number coil heaters for our clients , and we have been working hard to become an excellent supplier.
2.After long-term exploration, our Hot runner nozzle coil heater are continuously improved to meet the growing needs of our customers, and we strive to satisfy every customer.
We aim to create much more worth for our buyers with our abundant resources, highly developed machinery, experienced workers and great providers for High Quality Hot Runner Nozzle Mold Professional Design. We make full use of our own advantages, continue to innovate, and serve our customers to the utmost with our good reputation and commitment. We have innovative staff, advanced design and manufacturing technology and rich practical experience to meet your needs.
