W Type of Electric Furnace Used High Temperature Mosi2 Heater

We are a professional company which is specialized in research and development, production and sales of immersion boiler, high temperature cera, hot runner nozzle. If you have any interest or requirement of our products, we always welcome you to contact us at any time. We have a modern office environment, as well as high-quality scientific research and technical personnel and management team. Science and technology is the first productive force. If an enterprise wants to survive and develop, it must be based on science and technology. Only by focusing on the development of science and technology and technological innovation, can our products meet the needs of customers. In the process of rapid development, we continue to increase management investment, focus on the introduction and training of talents, formulate advanced production processes and technological standards, and implement lean production to ensure the quality and reliability of products.

High Temperature Cartridge Heater，Cartridge heaters are an excellent choice to use as a conductive source for heating solid metal plates, blocks and dies or as a convective heat source for use in a variety of liquids and gases. High temperature cartridge heater can be used in a vacuum atmosphere with proper design guidelines. High Temperature Cartridge Heater

Performance capabilities :High Temperature Cartridge Heater
Part temperatures up to 1400°F ( 760° C ) on alloy 800 sheath
Watt densities up to 40W/cm2
Maximum voltage up to 480VAC, Minimum voltage up to 5VAC
Minimum diameter up to 3mm
Maximum diameter up to 35mm
Benefits Easy and economical to install
Designed with first-class materials
Maximized heat transfer
Easy to maintain
uniform temperatures
Oxidation and corrosion resistant
Durable
CE certificated issued by TÜV Rheinland

Technical Detail:High Temperature Cartridge Heater

1 Tube diameter: Φ3mm-Φ30mm
2 Tube Material:SS304;SS316,SS321,NICOLOY800 etc
3 Insulation Material:High-purity Mgo
4 Reisistance wire element:Ni-Cr or FeCr
5 Lead Connection Option: Crimped or Swaged leads
6 Lead and type of connection leads, 10" Fiberglass Standard(Wire options,silicone high temperature frberglass).

Various common Cartridge heater,Support customization

High Temperature Cartridge Heater

Our factory participates in the exhibition every year, and many customers have established long-term cooperation with us through the exhibition.

How to install cartridge heater?

1.Make a hole in the section that is to be heated
2.Ream a smooth hole for contact and for better heat transfer
3.Extend the hole through the section so that the unit can be driven out if you should need to r1emover it.
4.If making a through hole is impossible ,increase the size of the hole without exceeding the tolerances
5.Reduce the vibration and flexing of the lead wires to prolong service life
6.Prevent contamination from liquids by protecting the end of the heater

When ordering Cartridge Heaters, please specify the following information:
1.Type of Cartridge Heater ( please refer to Termination Options ).
2.Diameter of Cartridge Heater.
3.Overall length for a straight Cartridge Heaters.
4.Wattage & Voltage
5.Lead type ( glass fibre / PTFE ) & lead length.

Our company continuously absorbs and introduces domestic and foreign technology, and develops a variety of high-tech and practical W Type of Electric Furnace Used High Temperature Mosi2 Heater. We stick to the spirit of craftsmanship to the end, reflecting the love and dedication of each of our employees in every job. Our items are exported worldwide.