Electric heater energy conversion and heating matters

An electric heater is a type of electrical energy that is converted into heat to stop heating the material to be heated. Electric heater equipment is strictly prohibited from dry burning, especially invasive electric heating elements, and such electric heating elements are made of stainless steel 304. In the task, the high-temperature fluid medium enters its output port under the action of pressure through the pipeline, along the specific heat exchange flow path outside the electric heating vessel, and uses the path of fluid thermodynamics design to take away the low-temperature heat energy generated in the task of the electric heating element. The temperature of the heated medium is lowered, and the electric heater outlet loses the low temperature medium required by the process. Select an electric heating tube of suitable power, and pay attention to the power load performance under the premise of ensuring the invalid operating temperature.

Ample understanding of the application environment of electric heating tubes, medium conduction or infrared radiation. Ample understanding of the wiring method of electric heaters, usually with star connection and three star connection, a single electric heating tube can be connected to 220v or 380v, multiple electric heating tubes can be connected indirectly to 380v. Avoid electric heater fire, cast copper heater flammable and explosive materials are strictly prohibited to be dried by electric heater; wire must be plugged, the wire should not be pulled out of the socket indirectly; electric heater should be guarded when used, should be unplugged when separated Plug, in the course of operation, in case of power failure, the plug should also be pulled out in time, do not forget; electric heaters without circuit fuses in the circuit should not be used.