Our company manufactures the Stainless Steel Cartridge Heating Element of any specification. In 2020, our company has sold 500,000 Stainless Steel Cartridge Heating Element.
Our company manufactures the Stainless Steel Cartridge Heating Element of any specification. In 2020, our company has sold 500,000 Stainless Steel Cartridge Heating Element.
Advantages of the Stainless Steel Cartridge Heating Element
The diameter can be customized, and it can be 3-50MM.
2. The length is not limited, 20-2000MM can be achieved.
3. The power is high, 2-5 times the power of the normal electric heating tube, which can be achieved (surface area 20 watts/square centimeter), and our company can achieve (surface area 60 watts/square centimeter).
4. It has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, easy installation, long service life, no pollution, and low price. At the same time, it saves electricity and is safe to use. It can be bent into various shapes, light, and easy to disassemble.
The performance requirements of the Stainless Steel Cartridge Heating Element (the element is tested under the specified test conditions and test voltage)
1) The heating time is generally not more than 15min.
2) Rated power deviation +5%～-10%.
3) Leakage current, after many tests, the leakage current does not exceed 0.5mA.
4) Insulation resistance should not be less than 50MΩ during factory inspection.
5) Insulation compressive strength, the heating tube has been tested many times without flashover and breakdown.
6) The ability to withstand power-on and power-off, undergoing 2000 power-on and power-off tests without damage.
7) The overload capacity should withstand 30 cycles of overload test without damage.
8) Heat resistance, should withstand 1000 cycles heat resistance test without damage.
The advantages of our company
1) Fine craftsmanship
2) Good performance
3) Professional customization
4) Complete product specifications
5) Fifteen years of office experience
