Cross-sectional area :3X3, 4.2X2.2, 4X2, 4x2.7, 4x2.5 3.3 X 3.3 3.5 X 3.5 4X 4 2.2X1.3
Hot runner heater is made of ni-cr resistance wire, placed in a ni-cr steel tube, filled with MgO powder for faster heat transfer and higher efficiency after compaction.The hot runner heater is annealed to obtain ductility that can be bent into any shape.Coil heating elements with thermocouples are also available.Hot runner bushing with different cross sections of hot runner heater, brass plating on the inside, stainless steel cover on the outside..Our Hot runner heater is annealed to obtain ductility that can be bent into any shape.
The application
Moulds and dies
The manifold
Hot runner nozzles and spruce shrubs
Packaging machinery
The manifold
Injection molding machine nozzle
Specification
1. Maximum temperature :700℃
2. Voltage :12 v ~ 380 v
3. Power :50 w ~ 2500 w
4. Cross-sectional area :3X3, 4.2X2.2, 4X2, 4x2.7, 4x2.5 3.3 X 3.3 3.5 X 3.5 4X 4 2.2X1.3
5. Sheath: nylon, metal woven, glass fiber, silicon rubber, kevlar
For enquiries, please specify the following parameters:
1. Volts&Watts
2. Inner diameter of coil heater :I.D(or) outer diameter of nozzle to be heated
3. Height of coil
4. Connect lead options and length
5. Thermocouple type (J or K)
6. Special types of drawings or samples
