Oct 14 2022
Oct 14 2022
Oct 14 2022
Oct 01 2022
08/Dec
2020
Generally, the surface of high-quality zirconia ceramics is white, yellow, or gray when impurities are contained, but it will turn yellow after sintering.
08/Dec
2020
Ceramic accessories refer to mechanical parts made of special ceramic materials through mixing, forming, sintering, and processing procedures.
08/Dec
2020
The grinding and polishing of zirconia ceramics is a super finishing method, which uses free abrasives to produce a fine screening effect on the surface materials to be processed, so as to achieve the processing effect. In the ultra-finishing and finishing of ceramic materials, e
30/Nov
2020
The uneven surface temperature of the heating element for the heater is caused by many reasons. First of all, we know the structure of the heating element for the heater. It uses a metal tube as the shell, and the spiral heating wire is evenly distributed in the center of the tub
07/Dec
2020
You need to know these when ordering a pencil heater.
07/Dec
2020
Since electric tube heaters are non-standard products, the structures are also various, and the design of the structure is often to facilitate the installation of the heating equipment or the degree of beauty, so when designing the structure of the electric tube heater, we also n
07/Dec
2020
The heating tube is a metal tubular heating element. The heating tube uses a metal tube as a shell, an alloy electric heating wire as a heating element, and a lead wire (rod) at one or two ends. The metal tube is filled with a dense magnesium oxide powder insulating medium for fi
07/Dec
2020
The heating tube is a metal tubular heating element. The heating tube uses a metal tube as a shell, an alloy electric heating wire as a heating element, and a lead wire (rod) at one or two ends. The metal tube is filled with a dense magnesium oxide powder insulating medium for fi
07/Dec
2020
The standard process specification of heater element's production line (Part 2)
07/Dec
2020
The standard process specification of heater element's production line (Part 1)