How to install the Cartridge Heater?

There are about 4 ways to install Cartridge Heater

1) How to install the single-head Cartridge Heater of the mold:

Open a hole in the mold, and then insert the mold electric heating tube.

2) How to install the threaded single-head Cartridge Heater:

Open an internally threaded hole to match the threaded single-head electric heating tube on the container, and then screw the electric heating tube on.

3) How to install the silicone die-casting single-head Cartridge Heater:

This is relatively simple to directly insert the liquid to be heated, but the silicone head should not be exposed to the liquid and soak in the liquid for a long time.

4) How to install the fixed baffle single-head Cartridge Heater:

On the basis of the installation of the electric heating tube of the mold, fix the baffle with screws.

There are four common installation methods for Cartridge Heater. If you encounter a Cartridge Heater with a special installation method, you can consult our company's professional salesman to guide you professionally.

Friends who want to know more about how to install Cartridge Heater can consult our company

At the same time, our company has many high-quality products. Welcome to order: Ceramic Cartridge Heater，Electric Cartridge Heater，Right Angle Cartridge Heater，etc.