PTC type ceramic heating plate is safe and environmentally friendly. The heating temperature of the heater body is designed to be below 280 degrees Celsius. In any case, the body is not red and has a protective isolation layer. Any application does not require heat insulation materials such as asbestos to cool down. It can be used with confidence. Problems causing fires.
PTC type ceramic heating plate is safe and environmentally friendly. The heating temperature of the heater body is designed to be below 280 degrees Celsius. In any case, the body is not red and has a protective isolation layer. Any application does not require heat insulation materials such as asbestos to cool down. It can be used with confidence. Problems causing fires.
Brief introduction of PTC type ceramic heater
The main way of PTC type ceramic heater is to attract cold air for heating, and then output hot air.
Features of the product
1) Easy to install,
2) High efficiency and energy saving,
3) Ventilation,
4) Beautiful and compact.
Compared with other heaters, the PTC type ceramic heater has the following characteristics:
1. Save power
Compared with other heater products, the PTC heater relies on the characteristics of the material itself and adjusts its own thermal power output according to the change of the ambient temperature, so it can optimize the heater's electric heating consumption to a minimum, and the material with high heating efficiency is also greatly Improve the utilization efficiency of electric energy.
2. Quite high security
The original design heating temperature of the PTC type ceramic heating element is below 280 degrees. In any application, there will be no redness or open flame on the surface of the electric heating tube heater, which may cause burns and potential safety hazards. Has very high security.
3. Long life, can work continuously for about 1000 hours
The heater can work continuously for about 1000 hours, the power failure is less than 10%, and there is no obvious output power drop.
4. Automatic temperature control
It can also automatically control the temperature in special situations such as rapid heating and fan failure.
5. Wide voltage range
The PTC type ceramic heater can be designed between 12V-380V according to customer needs, but the rated voltage is 380V, and the actual voltage will change to 300-400V, which basically does not affect the heat generation.
